Ceresit CT85 Flex - Adhesive and Base Coat for Expanded Polystyrene (EPS) Boards - 25kg

Ceresit CT85 Flex is specially created adhesive and base coat for fixing Expanded Polystyrene (EPS) and for applying a thin reinforced layer for external thermal insulation of buildings by means of light wet method. Ceresit Ct85 Flex is an element of ETICS (External Thermal Insulation Composite Systems) within Ceresit Ceretherm. Ceresit CT85 through the use of a combination of special fibres, increases the resistance of insulation system against damage and has an increased resistance to the formation of cracks and hairlines. This mortar can be used on newly erected buildings as well on the buildings to be thermo-renovated. Ceresit CT85 Flex has very good adhesion to clean substrates such as traditional plaster or cement plastered walls.

Assumed consumption:

• Fixing of EPS-boards: approx. 5.0 kg/m2,
• Armoured layer: approx. 4.0 kg/m2,
• Putty layer: approx. 1.0 kg/m2

CHARACTERISTICS

• High adhesion to mineral substrates and EPS boards,
• Flexible,
• High impact resistant,
• Unique fibre combination,
• Resistant to weather conditions,
• Resistant to hairlines and cracks,
• Vapour permeable,
• Low water absorption,
• Possibility of machine application.

APPLICATIONS

• For fixing Expanded Polystyrene (EPS) boards for applying a thin reinforced layer for external thermal insulation of buildings by means of light wet method. 

CERTIFICATION

• BBA Certificate No. 14/5142