Menu
Your Cart

Ceresit

Ceresit had brought into construction industry a steady stream of innovative products backed by more than 100 years of tradition and experience. It had started in 1905 and now a part of the Henkel Group. Today, Ceresit is internationally recognised brand offering a wide range of high-quality product and systems. Ceresit's offer of specialised products and solutions is based on consistent quality and long-time experience gained in the course of its history to satisfy the needs of the construction industry.

With the stringent quality control in development and production, and continuous process optimisation, Ceresit meets the demands of the construction industry and sets the highest of standards. This means assurance, durability and optimum value retention for customers and their building projects. You can buy high quality Ceresit products at Facade Shop, especially for External Wall Insulation (EWI).

Ceresit's innovative products benefit workers and users, with their safer working conditions or improved indoor air quality and the elimination of mould infestations. Specific product solutions -- external thermal insulation systems -- enable the end-user to save on energy costs and actively contribute to environmental protection. 

Types of Products

  • Adhesive mortars,
  • Adhesive rendering mortars,
  • Mineral Renders,
  • Priming Paints,
  • Priming Additives,
  • Facade paints,
  • Glass-fibre Mesh,
  • Polystyrene insulation boards.

Adhesive mortars, Adhesive rendering mortars

Ceresit ZU Base Coat Render and Mesh Adhesive is specially made to be used for fixing of polystyrene external wall insulation boards and for fixing the reinforcing protection mesh onto the boards. It is very flexible, has excellent adhesion and weatherproof. This mortar can be machine applied. Suitable for insulating the newly constructed buildings as well as refurbishments.

Ceresit CT 190 Flex Adhesive and Reinforcing Mortar is used for fixing of mineral wool facade boards and to embed the reinforcing protection mesh. This adhesive is strengthened with fibres and has a high resistance to mechanical damages, high adhesion to mineral substrates and wool, resistant to scratches and cracks. It is resistant to weather conditions, yet vapour permeable and very easy to work with. 

Ceresit CT 84 Express PU-adhesive used for fixing of polystyrene external wall insulation boards to substrate. Approximately 2 hours after the application, the polystyrene boards may be smoothed, anchored and, then the armoured mesh cane be embedded with the Ceresit CT 85, CT 87. It can be used from 0°C and at high humidity – especially recommended for work in low temperature when cement based adhesives drying time is significantly longer.

External Wall Insulation (EWI) Renders

Ceresit CT34 Mineral Render is used for rendering external surfaces and also as a filler. It can also be used to repairing traditional and cement-lime renders of external and internal surfaces of buildings. Ceresit CT34 can be applied in thin layers on the substrate, to maximum thickness up to 5 mm.

Ceresit CT137 Mineral Render is used for making thin layer plasters on concrete substrates, traditional plasters, gypsum substrates and gypsum boards, gypsum-fibre boards, etc. The plaster CT137 is manufactured in several colours.

Ceresit CT72 Silicate render would give a stone like facade is available in grain sizes of 1.5 mm or 2.5 mm. This decorative thin-layer render is highly vapour permeable and durable and is resistant to damage and cleaning. CT72 has a high resistant to weather conditions, resistant to the development of fungus, algae and mould.  CT72 is available in full palette of Ceresit Colours of Nature and can be machine applied.

Ceresit CT74 Silicone render is available in grain 1.5 mm or 2.5 mm is a decorative thin-layer plaster for indoor and outdoor applications. It is highly resistant to dirt (self-cleaning effect), highly elastic and impact resistant, and has high stability of colour. CT74 has a high resistant to weather conditions – resistant to the development of fungus, algae and mould. It can be machine applied. CT74 is available in full palette of Ceresit Colours of Nature. 

Ceresit CT174 combines good qualities of silicate plaster and silicone plaster.  CT174 is used for making thin-layer renders and is a recommended render for expanded polystyrene and mineral wool external insulation boards. It is highly vapour permeable and durable, resistant to damage and cleaning. CT174 has a high resistant to weather conditions – resistant to the development of fungus, algae and mould. It can be machine applied. 

Ceresit CT77 Mosaic Render is used for applying decorative colourful renders to external wall insulation systems. Transparent silicone-acrylic resins are the binder of Ceresit CT77 and coloured quartz gravels size 1.0-1.6 mm or 1.4-2.0 mm are the fillers. This material is designed for applying with a steel long float. CT77 is especially recommended to be applied to the exposed to abrasion walls inside the buildings, such as at the entrance, corridors, staircases. Outside the buildings, CT77 is recommended on the substrates easy to get dirty: on the pedestals, railings, door and window frames.

Ceresit CT136 Dry Dash Receiver is a polymer modified cement based render suitable for use as a top coat for External Wall Insulation Systems. Ceresit CT136 can be used as a top coat to receive a Dry dash finish using  decorative aggregates, or floated up to provide a thick render ready to receive a textured synthetic finish. It is very easy to apply and eliminates inaccurate site mixing. It is formulated to give a longer open time to receive dashing aggregate and can be applied in a 6mm coat. Available in a range of colours.

Primers

Ceresit CT16 Primer is ready-to-use homogeneous primer that gives a very good covering and very easy to apply. CT16 primer is waterproof, has higher adhesion of the plaster to the substrates. It is recommended for priming the reinforced layers in EWI systems. Priming substrates with CT16 considerably decreases paint absorption, prevents from too fast drying. The fine aggregates included in CT16 make the primed surfaces rough and scratch resistant. The surface is expanded and increases the adhesion of the renders, putties and paints. Ceresit CT16 prevent formation of stains on the coloured acrylic, mineral and silicone plasters.

Ceresit produces paints, glass fibre mesh, expanding foam, water proofing cementitious products, cleaners, impregnation agents, insulating board among many products. Please call.

Brand: Ceresit Model: 25kg
Delivery Time: 7 - 10 days
Ceresit CT80 is an universal adhesive mortar for fastening mineral wool, polystyrene and phenolic EWI boards and also as a thin layer of base coat render reinforced with fibreglass mesh on the insulation boards in Insulated Renders Systems. Ceresit CT80 has very good adhesion to load bearing substra..
£16.00
£19.20 inc VAT
Brand: Ceresit Model: 25kg
Delivery Time: 5 - 7 days
Ceresit CT77 Mosaic Render is used for applying decorative colourful plasters to traditional plasters, concrete substrates, gypsum substrates and chipboards, gypsum boards, etc. It is made of coloured quartz gravels size of 1.2 mm - 1.8 mm and natural marble aggregates on a transparent resin binder,..
£69.00
£82.80 inc VAT
Brand: Ceresit Model: 15L
Delivery Time: 2 - 3 Days
Ceresit CT42 Acrylic Paint is used for protecting facades, concrete structures, cement plasters, lime-cement plasters, lime plasters, mineral plasters on exterior and interior. The facades covered with Ceresit CT42 can be washed with appliances operating under low pressure. The exposure of the facad..
£65.00
£78.00 inc VAT
Ceresit CT48 Silicone Paint - 15L
Hot Guide Price
Brand: Ceresit Model: 15L
Delivery Time: 2 - 3 Days
Ceresit CT48 Silicone Paint is used for protecting facades, concrete structures, cement plasters, lime-cement plasters, lime plasters, mineral plasters on exterior and interior. The facades covered with Ceresit CT48 can be washed with appliances operating under low pressure. The exposure of the faca..
Guide Price: £89.00
£106.80 inc VAT
Ceresit CT49 Silix XD Nano-Silicone Paint - 15L
Guide Price
Brand: Ceresit Model: 15L
Delivery Time: 2 - 3 Days
Ceresit CT49 Silix XD Nano-silicone paint had been created from selected and modified silicone resins, polysiloxane resins, special fillers and pigments. The addition of the Polytetrafloroethylene (PTFE) additives to the recipe gives an extremely high degree of hydrophobia to the surface coating. Tr..
Ceresit CT136 Dry Dash Receiver - 25kg
Guide Price
Brand: Ceresit Model: 25kg
Delivery Time: 2 - 3 Days
Ceresit CT136 Dry Dash Receiver is a polymer cement based render suitable for use as a top coat for External Thermal Insulation Composite Systems (ETICS). Ceresit CT136 can be used as a top coat to receive a dry dash finish using  decorative aggregates, or floated up to provide a thick render r..
Brand: Ceresit Model: 25kg
Delivery Time: 2 - 3 Days
Ceresit CR65is a water impermeable tanking slurry, which permits diffusion that is suitable for drinking water tanks.Ceresit CR65is frost resistant and is used on the horizontal and vertical surfaces of buildings, on structural elements, on water tanks, for waterproofing against water pressure, and ..
£29.98
£35.98 inc VAT
Brand: Ceresit Model: FG-038
Delivery Time: 2 - 3 Days
PU Expanding Foam Gun is a professional tool which gives a much greater degree of control, increases the application accuracy and cuts down on unnecessary wastage. Foam gun is manufactured to the highest quality controls and ensures long life. PU Expanding Foam Gun has adjustable flow valves to aid ..
£20.00
£24.00 inc VAT
Brand: Ceresit Model: 750ml
Delivery Time: 2 - 3 Days
Ceresit WhiteTeQ is a high performance white polymer foam made of specially modified polyurethane. Ceresit WhiteTeQ polymer foam has an extra-fine cell structure and enhanced UV resistance. The cured foam has high thermal efficiency (up to 0,032 W/mK) and sound damping properties (63 dB). Ceresit Wh..
£11.50
£13.80 inc VAT
Brand: Ceresit Model: 25
Delivery Time: In stock, 1-2 days
Ceresit ZU White is used to fix using polystyrene boards in external thermal insulation composite systems. It is a component of Ceresit Ceretherm Premium system. Ceresit ZU White is also used for fixing reinforcing protection mesh layer. It is used in new build as well ..
£19.88
£23.86 inc VAT
Brand: Ceresit Model: 1200kg - Pallet of 48
Delivery Time: In stock, 1-2 days
Ceresit CT87 White Adhesive Mortar is a high quality mortar is used for fixing of EPS or mineral wool panels and for applying the reinforcing protection layer to the new builds as well to thermo-renovating existing buildings.Ceresit CT87 White Adhesive Mortar is additionally reinforced with fibres w..
£950.00
£1,140.00 inc VAT
Brand: Ceresit Model: Pallet of 48
Delivery Time: In stock, 1-2 days
Ceresit ZU Insulation Mesh and Adhesive is used as a base coat render to fix polystyrene boards to external walls. It is a component of following ETICS from Ceresit Ceretherm Premium, Express and Wool Premium. Ceresit ZU is used for fixing of  EPS boards and for applying the rein..
£528.00
£633.60 inc VAT
Showing 1 to 12 of 36 (3 Pages)