All Products

290mm x 115mm x 52mm Portland LDF Natural Anthracite Bricks have an unusual Anthracite colour of muted black, a smooth face and are highly resistant to external factors, including water, frost, wind and fire. These clinker bricks are denser, heavier than standard bricks and gives out a metallic soun..

10mm Cedral Lap- Unpainted is an attractive, fibre cement cladding board with the visual appeal of natural timber an alternative to all types of traditional cladding. Cedral Lap is fitted in traditional lapped style and is rot free. Cedral Lap boards are installed to the ventilated rainscreen princi..

10mm Cedral Lap with Woodstain Finishe is an attractive, fibre cement cladding board, an alternative to all types of traditional cladding. Cedral Lap is fitted in traditional lapped style and is rot free. Cedral Lap boards are installed to the ventilated rainscreen principle - air can flow..

Cedral Aluminium Connection Profile is an universal aluminium trim used to wrap around the edge of the weatherboard on a window or door reveal or along the soffit line. It can also be used as an external corner. Available at 3m lengths. Colour match to Cedral plank available.  ..

40m Cedral Aluminium Perforated Closure Profile is an accessory for fixing Cedral weatherboard cladding installation to block insects entering. Can be used with both Cedral Click and Cedral Lap cladding systems. Available at 2.5m lengths.              Cedral L..

Cedral Stainless Steel Screws  (colour to match Cedral Cladding) used for fixing Cedral Click and Cedral Lap fibre cement weatherboard planks to the structure and to battens. Box of 100.             Cedral Lap              &n..

500ml Cedral Touch Up Paint to repair Cedral weatherboards, where there is damage to paint or on cut edges. Available in colours to match Cedral weatherboards. Maintains an aesthetically-pleasing finish where weatherboards are damaged, or cut...

50mm Rockwool Dual Density Slab is a specialised dual density rock wool board that can be used for external wall insulation, where the higher density face of the board can take renders directly, while the lover density inner face can accommodate slight imperfections in the fabric of the building. By..

365mm x 14mm x 52mm Portland PEXLDF Natural Anthracite Brick Slips are designed to replicate the look of masonry that can be glued directly to substrate or fitted to a backing board. They are lightweight compared to bricks and have an unusual Anthracite colour of muted black, a smooth face and ..

240mm x 14mm x 71mm Faro Granit Natural Gery Brick Slips are designed to replicate the look of masonry that can be glued directly to substrate or fitted to a backing board. They They are lightweight compared to bricks and have an unusual light and darker shades of grey colour smooth face a..

240mm x 14mm x 71mm Oslo Pearl White Smooth Facade Brick Slips are designed to replicate the look of masonry that can be glued directly to substrate or fitted to a backing board. They are made of clay rich in Kaolinite originating from the Westerwald region, which gives its pearl white colour, ..